Oil burner contractors must obtain a permit from the fire department to install and/or alter your oil burning equipment, oil line, or fuel oil tank. A Fire Department inspection of the completed work is required when a permit is issued. Inspections take place Tuesday, Thursday, and Saturday mornings from 9am - 12pm. Please call (978) 640-4410 to schedule your inspection date.
The new certificate of compliance (Inspection Form 1A) for fuel supply lines does not require a Fire Department inspection; however, a copy of the form is required to be sent to the Fire Department by mail or fax once completed by the oil burner technician. This inspection is conducted by your oil service company to verify that the oil line configuration and installation meets today's code.
When obtaining estimates for work, make sure contractors provide for necessary permits and final inspection costs in their bid.
Homeowners advised by their oil burner technician and/or oil delivery company that they need to upgrade their oil supply line in their home are being advised to do so based on a new Massachusetts Fire Code Regulation. For a more detailed explanation visit the MassDEP website or
MGL Chapter 148 Section 38J - Residential property utilizing heating oil tanks; safety requirements; inspection; certification.
Homeowners Guide for Oil Burner Service
1. When you call the service company, you should always ask for the name of the individual who will be coming to your home to service your oil burner and for a cost estimate. Typically, there is a charge for a service call plus a fee for the parts needed. 2. You should always perform a license search to confirm that the person holds a valid oil burner certificate of competency. To do this, please follow these steps:
- Click on "DPS License Lookup" and then click the license search icon.
- Make sure the search term is set to "Name"
- Enter the persons name into the search space and choose "Oil Burner - Technician Certificate" as the license type.
- A person holding a valid certificate will have a "Status" of current.
2. When the technician arrives, ask for proper identification.
3. A good technician will always ask questions of the home owner to assist in narrowing down the problem area. Typical questions include the following:
Has this happened before or is this the first time?
How was the unit running before it broke?
Was the unit making any odd noises or emitting unusual odors?
Has there been a recent power outage?
Have there been any recent changes to your heating system or its operation?
Have you hit any reset buttons or shut anything off?
Have you done on your own to attempt to resolve the problem?
4. If you agreed to the quote you should not be charged with an assistant without prior notice. If the labor necessary requires more than one person, you should be informed of this and have the ability to agree or disagree with the new quote. You should always stay with the technician while he is performing the labor to watch and ask questions.
5. The technician should check the position of switches and valves as well as the furnace for a buildup of oil inside the furnace before immediately hitting the reset button.
Finally, you should always feel free to ask the technician what the cause of the problem was; how he came to that conclusion; and what was done to correct the problem.
Homeowners Guide for Annual Oil Burner Cleanout
Oil burners and boilers should get a cleaning on an annual basis. Someone should always be present with the service technician while in your home. When paying for a boiler / burner cleaning, make sure that the following is done:
The oil filter is replaced.
The burner nozzle is replaced. You may also want to ask the technician to show you the gallons per hour, the type of nozzle and make sure that it is the similar to the one removed,
The oil pump strainer is replaced.
The chimney and flues are opened and vacuumed clean.
The boiler is opened up and brushed / vacuumed.
The oil line is purged of air after the parts above are replaced.
The chimney cleanout port is closed after cleaning and the flue parts are screwed back together.
A combustion efficiency test is performed
Before the technician leaves, you should run the thermostat up and make sure you get heat. This will ensure the technician didn’t inadvertently shut off a pump or close a valve.
You should also ask for documentation dated and signed by the technician with the results of the combustion efficiency and date performed for your records.
Reprinted from the Official Website of the Massachusetts Executive Office of Public Safety and Security (EOPSS).